Návrh zariadenia na generovanie pravouhlých impulzov prúdu pomocou programu ATP
Main Article Content
Abstract
Elektrotechnické materiály treba skúšať rozličnými typmi testov s cieľom zistiť ich elektrické, fyzikálne a chemické vlastnosti. Článok je orientovaný na návrh generátora pravouhlých impulzov prúdu pomocou výpočtovej techniky. Počiatočné hodnoty elektrických parametrov prvkov v náhradnej schéme určili sa výpočtom. Na výpočet časového priebehu výstupného prúdu pred a po optimalizácii prvkov ATP program bol použitý.
Electrical materials should be tested in different types of tests to determine their electrical, physical and chemical properties. This article is oriented to design of long-duration current pulse generator using computer technology. The initial value of the electrical parameters of elements in the equivalent circuit was determined by calculation. To calculate the output current during the time before and after optimization of circuit elements ATP program was used.
Electrical materials should be tested in different types of tests to determine their electrical, physical and chemical properties. This article is oriented to design of long-duration current pulse generator using computer technology. The initial value of the electrical parameters of elements in the equivalent circuit was determined by calculation. To calculate the output current during the time before and after optimization of circuit elements ATP program was used.
Article Details
Issue
Section
High Voltage Technique and Diagnostics in Electrical Power Engineering
Authors of the contribution acknowledge that the contributed article has not been up to the day published in any journal, neither has it been submitted for publishing in another journal. At a time, Authors delegate to the editorial board of ELEKTROENERGETIKA journal the authority to publish the contributed article on the journal Internet WEB page (http://jeen.fei.tuke.sk) at understanding that the journal editorial board assumes no responsibility for damages suffered due to use of acts, methods, products, instructions for use or other ideas published by the article authors, neither for by them advertised information. Authors represent that they are fully aware of the fact that articles are not being linguistically corrected by the journal editorial staff, and that they hence assume unlimited responsibility for lingual correctness.